Earth Resistance Clamp Testers: Supply Only In Maharashtra We offer diverse range of Tong Tester (Clamp Meter) in the market. Clamp Meter is an electrical tester having an AC clamp meter and volt meter for testing the flow of electricity current in a conductor.These instruments induce a test current into earth systems and measure ground resistance in multi ground installations without needing to disconnect the ground.They offer market leading access through elliptical jaw design and short body length to reach into connection wells, with advanced features, simple operation and CAT IV 600 V safety rating. DET 14C Testing Equipment:- The MEGGER DET-14C is mainly characterized by having the 3 ½ digital display with the liquid crystal display. It’s battery is of Internal Ni-MH type which has the facility of re-chargeability. The resistivity measurement of it is about 4 wire soil. The Measurement method is available is two terminal which are namely 3T and 4T.
Earth Resistance Clamp Testers: DECT2 Earth Resistance Clamp Testers Description The Digital Earth Clamp Tester measures earth / ground resistance using clamp on technology. This is major breakthrough in traditional grounding resistance measurement.DECT 2 can measure earth resistance and earth bond while DECT 3 can measure earth resistance, earth bond & leakage current measurement upto 30A.This meter is a useful addition to the more traditional methods of earth/ground resistance testing that may require disconnection & the use of stakes or ground rods. Simply clamp around the conductor or stake/rod and measure the resistance to ground fast and accurately. The unique long jaw is particularly suitable where grounding is done by flat steels or copper strips. It has low battery indication & data hold facility with memory function. This meter is double insulation level and hence protected from external magnetic & electric field. Features:
Battery Operated, 6V DC
Long Jaw Size 65mm x 32mm. suitable for flat metal strips used for earthing.
Measures Earth resistance in 1 Sec.
Double insulation and protect from external magnetic as well as electric field.
Low Battery Indication.
Power Consumption: Approx. 5mW, 50 hours continuous.
Clamp Testers DET20: Description This is conventional type 3 ½ digit LCD display which can measure Earth Resistance, Soil Resistivity & Earth Voltage .It has a unique RSR technology in which even at the drop of battery voltage the measurement reading remain constant . This meter has rechargeable long life battery which reduces the cost of battery. It has 128Hz test frequency which eliminates the harmonics interference. Earth resistance is measured by three wires & Soil Resistivity is measured by four wire measurement techniques. This meter is shock proof & drop dust proof ABS casing for heavy duty. This meter is Type tested as per IS 9223. Features:
3 ½ digits LCD display
0.01Ohms / 10mA / 128 Hz / Less than 40 V
Earth voltage measurement 0.1 to 200 V
Soil Resistivity measurement
Earth Resistance measurement
Measuring Ranges 20 / 200 / 2000 Ohm
Withstands 240V RMS 50Hz applied between any two terminals for 1 min
Maximum Output Voltage Less than 40 Vrms as per standards.
DECT3 Clamp Testers: Description The Digital Earth Clamp Tester measures earth / ground resistance using clamp on technology. This is major breakthrough in traditional grounding resistance measurement. DECT 3 can measure earth resistance, earth bond & leakage current measurement .This meter is a useful addition to the more traditional methods of earth/ground resistance testing that may require disconnection & the use of stakes or ground rods. Features:
It takes few seconds for earth resistance and earth bond measurements.
Resistance measurement range: 0.01Ohm to 1200 Ohm.
AC Leakage Current measurement range: 0 to 20A
Memory storage Facility to store 99 readings and RS232 interface.
Low Battery indication and Data Hold Facility.
Automatic Range Selection and Fast Self Calibration.
Earthing Kit: Earthing Kits for Optical Fiber Cables Relying on our wide experience & skills in this field, we are noted as one of the most prestigious manufacturers and exporters of Earthing Kits for Optical Fiber Cables . Widely used in telecom industry, all these kits are manufactured from supreme quality of materials and components.